Page 13
Stiletto Beast™ User Manual - Rev. A
(c) 2016 Blizzard Lighting, LLC
Test Mode:
1.) Navigate the main menu until you reach
Test,
press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to select
All
(motors and LEDs),
Pan & Tilt
(motors), or
LED
(LEDs only).
3.) Press the
<ENTER>
button to confirm your selection.
Fan Control:
1.) Navigate to
Set <ENTER>
, then
Fan Control <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Auto, High
or
Low.
3.) Press the
<ENTER>
button to confirm.
DMX Fail Setting:
1.) Navigate to
Set <ENTER>
, then
DMX Fail <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Blackout, Hold,
or
Auto Mode.
3.) Press the
<ENTER>
button to confirm.
Menu Shut Off Timer:
1.) Navigate to
Set <ENTER>
, then
Disp. Setting <ENTER>.
2.) Use the
<UP/DOWN>
buttons to select
Shut off time,
press
<ENTER>
.
3.) S
et the timer to shut off the display after 2-60 minutes of inactivity.
Flip Display:
1.) Navigate to
Set <ENTER>
, then
Disp. Setting <ENTER>.
2.) Use the
<UP/DOWN>
buttons to select
Flip Display,
press
<ENTER>
.
3.) From here, you can select
On/Off
to flip the display.
Menu Key Lock:
1.) Navigate to
Set <ENTER>
, then
Disp. Setting <ENTER>.
2.) Use the
<UP/DOWN>
buttons to select
Display flash,
press
<ENTER>
.
3.) Now use the
<UP/DOWN>
buttons to select
On/Off,
press
<ENTER>
.
4.) To unlock while
On
, press
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Display Flash:
1.) Navigate to
Set <ENTER>
, then
Disp. Setting <ENTER>.
2.) Use the
<UP/DOWN>
buttons to select
Disp.flas,
press
<ENTER>
.
3.) Now use the
<UP/DOWN>
buttons to select
On/Off,
press
<ENTER>
.
4.) When set to On, the LCD
display will flash if DMX signal is lost
.
Pan/Tilt Reverse:
1.) Navigate to
Set <ENTER>
, then
Pan
or
Tilt <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Normal,
or
Reverse.
3.) Press the
<ENTER>
button to confirm.
Encode (Pan/Tilt Error Correction):
1.) Navigate to
Set <ENTER>
, then
Encode <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
On
or
Off.
3.) Press the
<ENTER>
button to confirm.
Factory Reset:
1.) Navigate to
Set <ENTER>
, then
Factory Reset <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Yes
or
No.
3.) Press the
<ENTER>
button to confirm.
