Page 3
Snowblind User Manual Rev. C
© 2021 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x SnowBlind™
• 1 x Power Cord
• This Lovely User Manual
Getting It Out Of the Box
Congratulations on purchasing one way cool, way flexible, way original LED
strobe light! Now that you’ve got your SnowBlind™ (or hopefully, Snow
Blind’s!), you should carefully unpack the box and check the contents to
ensure that all parts are present and in good condition. If anything looks as if
it has been damaged in transit, notify the shipper immediately and keep the
packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch
.
Warning! All fixtures must be connected to circuits with a suitable
Ground (Earthing).
Getting A Hold Of Us
If something happens to go wrong, visit blizzardpro.com/support and
open a support ticket. We’ll be happy to help, honest.
Disclaimer:
The information and specifications contained in this document are
subject to change without notice. Blizzard Lighting™ assumes no responsibility
or liability for any errors or omissions that may appear in this user manual.
Blizzard Lighting™ reserves the right to update the existing document or to
create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardpro.com.
Author:
Date:
Last Edited:
Date:
J. Thomas
2/25/2013
J. Thomas
11/8/2021
