Blizzard Lighting Q-Stick RGBW LED User Manual Download Page 3

Page 3

Q-Stick™ RGBW Manual Rev. B 

 

 

Copyright (c) 2012 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

 

 

• 1 x Q-Stick™ RGBW Professional LED PAR Fixture

 

• This Lovely User Manual

Getting It Out Of The Box

 

Congratulations on quite a fine purchase!  You’re the quintessential 

quick-witted lighting guy/gal which everyone always re-Quests! (“Q” 

words, get it?)  Now that you’ve got your Q-Stick™ (or hopefully, 

Q-

Sticks

), you should carefully unpack the box and check the contents 

to ensure that all parts are present and in good condition. If anything 

looks as if it has been damaged in transit, notify the shipper immedi

-

ately and keep the packing material for inspection.  Again, please save 

the carton and all packing materials. If a fixture must be returned to 

the factory, it is important that the fixture be returned in the original 

factory box and packing.

Powering Up!

 

All fixtures must be powered directly off a switched circuit and 

cannot 

be run off a rheostat (variable resistor) or dimmer circuit, even 

if the rheostat or dimmer channel is used solely for a 0% to 

100% switch

.  

AC Voltage Switch -

 Not all fixtures have a voltage select switch, so 

please verify that the fixture you receive is suitable for your local pow

-

er supply.  See the label on the fixture or refer to the fixture’s specifi

-

cations chart for more information.  A fixture’s listed current rating is 

its average current draw under normal conditions. Check the fixture or 

device carefully to make sure that if a voltage selection switch exists 

that it is set to the correct line voltage you will use.

 

Warning! 

Verify that the voltage select switch on your unit 

matches the line voltage applied. Damage to your fixture may 

result if the line voltage applied does not match the voltage 

indicated on the voltage selector switch. All fixtures must be 

connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email.  

We’ll be happy to help, honest.

 

 

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

[email protected]

  

|  Phone: 866-493.6025

www.blizzardlighting.com 

Summary of Contents for Q-Stick RGBW LED





















Reviews: