Page 12
Motif™ Metro User Manual Rev. A
© 2020 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Starting DMX Address
1.) Navigate the main menu until you reach
DMX
, and press the
<ENTER>
button.
2.) Then highlight
Address
, and press
<ENTER>.
3.) Use the
<UP/DOWN>
buttons to select a starting DMX address
ranging from 1-512, and press the
<ENTER>
button to confirm.
DMX Channel Mode
1.) Navigate the main menu until you reach
DMX
, and press the
<ENTER>
button.
2.) Then highlight
Channel Mode
, and press
<ENTER>.
3.) Use the
<UP/DOWN>
buttons to select
4-channel
,
6-channel
, or
9-channel
, and press the
<ENTER>
button to confirm.
M/S Mode
1.) Daisy chain the DMX input/output connections of the fixtures.
2.) On the 1st fixture, navigate to
System
and press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to highlight
Host Mode
, and then
press
<ENTER>
. Then highlight
ON
, and press
<ENTER>
.
4.) On following fixtures, verify that this setting is set to
OFF
.
5.) If the DMX signal is lost while operating, it will default to the set
Auto Mode, or Manual Mode (Manual Mode if Auto is set to Stop).
Auto Mode & Manual Adjustments
Allows a single or daisy chained units to run factory installed programs.
Auto Mode
1.) Navigate the main menu until you reach
Auto
, and press the
<ENTER>
button.
2.) Use the
<UP/DOWN>
buttons to highlight
Run Mode
, and press
the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to highlight
Flash, Fade, or Pulse
,
and press the
<ENTER>
button.
4.) To stop an auto program, use the
<UP/DOWN>
buttons to
highlight
Stop
, and press
<ENTER>
.
5.) To adjust the auto speed, highlight
Speed
and press
<ENTER>
.
6.) Now you can adjust the speed from 0-255 (slow <-> fast).
Manual Mode
1.) Navigate to
Manual
, and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight
Dimmer, Strobe, Red,
Green, Blue, or White
, and press
<ENTER>
.
3.) Adjust the levels from 0-255, and press the
<ENTER>
button.