Page 12
Motif™ Atelier 16FX User Manual Rev. A
Copyright © 2018 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Setting the DMX Address:
1.) The default mode for the fixture is DMX, which appears as
001
on the LED readout. To
select a different DMX address, using the
<MENU>
button, select
ADDR
, then hit
<ENTER>
.
Use the
<UP/DOWN>
buttons to select the correct address, then hit
<ENTER>
to confirm.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, press the
<MENU>
button, then use the
<UP
/
DOWN>
buttons until the display reads
SET
and press the
<ENTER>
button. Then use the
<UP/
DOWN>
buttons until the display reaches
CHMD
, and press
<ENTER>
. Now press the
<UP/
DOWN>
buttons again to highlight your desired DMX channel mode, and press the
<ENTER>
button to confirm.
Slave Mode:
1.) Daisy chain the fixtures DMX in/out, having the controller at the beginning of the line.
2.) There is nothing else to it! The first fixture in the DMX chain is the master fixture, and the
following fixtures will follow the master.
Dimming Mode Settings:
Allows users to set the fixture to use 1 of 4 (x2) dimming curve settings for smoother (and slower)
dimming capabilities. In the control panel menu, there are two settings for each curve that are
distinguishable from one another by the trailing dot.
*The curve settings with the trailing dot adds a bit more delay to the curve for a smoother effect.
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
SET
and press
<ENTER>
,
then
<UP/DOWN>
buttons again to scroll to
DIM
, and press the
<ENTER>
button.
2.) Now use the
<UP/DOWN>
buttons to highlight either
LIN
(Linear),
SQR
(Square),
ISQR
(Inverse Square),
SCUR
(S-Curve),
LIN.
(Smooth Linear),
SQR.
(Smooth Square),
ISQR.
(Smooth Inverse Square), or
SCUR.
(Smooth S-Curve), then hit
<ENTER>
.
LED Display Setting:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
SET
and press
<ENTER>
,
then navigate to
DISY
(display). Press the
<ENTER>
button.
2.) In
DISY,
you can set the LED menu display to be continually on, or automatically shut off
after 2 min of inactivity.
DMX%
DMX%
DMX%
DMX%
Output
Output
Output
Output
(LIN, LIN.)
(SQR, SQR.)
(ISQR, ISQR.)
(SCUR, SCUR.)
Linear Curve
Square Law
Inverse Square Law
S-Curve