Page 13
LB-Hex User Manual Rev. B
© 2017 Blizzard Lighting, LLC
Speed Settings:
1.) Navigate the main menu until you reach
Sp--
, and press
<ENTER>
.
2.) Then use the
<UP/DOWN>
buttons to select a speed setting from
0-99
.
3.) Press the
<ENTER>
button to confirm.
Static Colors, Strobe, & Sound Active Mode
1.) Navigate the main menu until you reach
CoLo
, and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to select any of its static colors from
0-63
.
3.) Press the
<ENTER>
button to confirm your choice.
4.) You can then add a strobe effect if desired.
Strobe:
a.) Navigate the main menu until you reach
Strb
, and press
<ENTER>
.
b.) Then use the
<UP/DOWN>
buttons to select a strobe speed setting from
0-20
(fast <--> slow).
c.) Press the
<ENTER>
button to confirm.
Sound Active:
Navigate the main menu until you reach
SOUN
, and press
<ENTER>
.
Manual Color Mixing:
Mix your own custom colors using the R/G/B/A/W/UV intensity level setting.
Red:
1.) Navigate the main menu until you reach
rL--,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust red
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
Green:
1.) Navigate the main menu until you reach
GL--,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust green
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
Blue:
1.) Navigate the main menu until you reach
bL--,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust blue
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
Amber:
1.) Navigate the main menu until you reach
AL---,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust white
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
White:
1.) Navigate the main menu until you reach
uL---,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust white
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
UV:
1.) Navigate the main menu until you reach
UL---,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to adjust white
000-255.
(0% <--> 100%).
3.) Press the
<ENTER>
button to confirm.
LED Display On/Off:
You can set the LED menu display to either stay on continually, or turn off after 30 seconds of inactivity.
1.) Navigate the main menu until you reach
LEd,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight either
on
or
oFF
.
3.) The
On
setting will keep the display on continually, and
oFF
will turn the display off after 30s.
4.) Press the
<ENTER>
button to confirm your choice.
Dimming Speed & Curve Settings:
You can manually set the fixtures dimming curve of your choice:
1.) Navigate the main menu until you reach
node,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight a speed from
0-4
(fast <--> slow).
3.) Press the
<ENTER>
button to confirm.
