background image

Page 4

HushPar Infiniwhite Manual Rev. A   

 

© 2014 Blizzard Lighting, LLC

SAFETY INSTRUCTIONS

•  Please keep this User Guide for future use. If you sell the unit to someone 

else, be sure that they also receive this User Guide.

•  ALWAYS make sure that you are connecting to the proper voltage, and that 

the line voltage you are connecting to is not higher than that stated on the de-

cal or rear panel of the fixture.

•  This product is intended for indoor use only.

•  To prevent risk of fire or shock, do not expose fixture to rain or moisture. 

•  Make sure there are no flammable materials close to the unit while operating.

•  The unit must be installed in a location with adequate ventilation, at least 

20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are 

blocked.

•  ALWAYS disconnect from the power source before servicing or replacing fuse 

and be sure to replace with same fuse size and type.

•  ALWAYS secure fixture using a safety chain. NEVER carry the fixture by its 

cord. Use its carrying handles.

•  DO NOT operate at ambient temperatures higher than 104°F (40°C).

•  In the event of a serious operating problem, stop using the unit immediately. 

NEVER try to repair the unit by yourself. Repairs carried out by unskilled people 

can lead to damage or malfunction. Please contact the nearest authorized tech

-

nical assistance center. Always use the same type spare parts.

•  NEVER connect the device to a dimmer pack.

•  Make sure the power cord is never crimped or damaged.

•  Never disconnect the power cord by pulling or tugging on the cord.

•  Avoid direct eye exposure to the light source while it is on.

Caution! 

There are no user serviceable parts inside the unit. Do not 

open the housing or attempt any repairs yourself. In the unlikely event 

your unit may require service, please contact Blizzard Lighting at sup-

[email protected].

Summary of Contents for HUSH PAR Infiniwhite 500





















Reviews: