background image

Page 10

Flurry EXA™ Moving Head Wash - Rev. A  

 

 

(c) 2015 Blizzard Lighting, LLC

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS 

DMX SYSTEM

In addition to the unbridled thrill you already 

received the first time you plugged in your 

fixture, you’ll be delighted to know that This 

fixture also works seamlessly with our wiCI

-

CLE

®

 Wireless DMX system, 

without additional power

.

• ONLY fixtures bearing this logo are certified for use with the wiCICLE

®

 

without external power.

• Unauthorized modification and/or using the wiCICLE

®

 with un-

approved fixtures may cause damage to the wiCICLE

®

 or fixture.  

UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPON-

SIBLE FOR ANY DAMAGE FROM SUCH OPERATION.

• Fixtures bearing the above logo 

MUST

 only use cable and connectors 

which separate chassis/case ground from cable shielding.  Cabling with 

the shield connected to the connector’s case/chassis may cause malfunc-

tion and damage to the wiCICLE

®

 or fixture.

• wiCICLE

®

 transmitters have additional power requirements and 

therefore cannot be powered directly from the fixture.  You will 

need to utilize the supplied AC/DC adaptor to drive wiCICLE

®

 

transmitters in your system.

WE HAD THIS SPACE, SO WE FIGURED WE’D DRAW 

YOU A PICTURE:

Antenna Housing & 1/2-wave 

Antenna

Antenna ferrule & articulation 

joint

Stainless Steel Housing

Recessed Selector Button
Status LED

3-Pin XLR Connector 

(Male on transmitter, Female 

on receiver model)

Summary of Contents for Flurry EXA





















Reviews: