Page 13
Colorise™ Quadra Manual Rev. A
© 2015 Blizzard Lighting, LLC
Control Panel Menu Structure
ADDR
001-512
To choose the DMX address
STAT
R
Red intensity (0% <--> 100%)
G
Green intensity (0% <--> 100%)
B
Blue intensity (0% <--> 100%)
W
White intensity (0% <--> 100%)
SHUT
Flash / strobe speed (0-255)
PRSC (preset colors)
NONE, R, G, B, W, RGW, RGB, YELLOW, PINK, CYAN, ORANGE, VIOLET,
GOLDEN, 2700K, 3200K, 4000K, 5500K, 6500K, RGBW
SET
CAL
To set global intensity levels of each color + USE: YES/NO
CHMD
10CH
To run in 10-channel mode
7CH
To run in 7-channel mode
5CH
To run in 5-channel mode
4CH
To run in 4-channel mode
3CH
To run in 3-channel mode
DIM
(dimming)
LIN
Linear dimming curve
SQR
Square law curve
ISQR
Inverse square law curve
SCUR
S-curve
LIN.
Linear dimming curve (smooth)
SQR.
Square law curve (smooth)
ISQR.
Inverse square law curve (smooth)
SCUR.
S-curve (smooth)
DISY
ON
LED menu display is on continually
2MIN
LED menu display shuts off after 2 minutes of inactivity
LOCK
YES/NO
Menu locks after 2min. Hold any key 10 seconds to unlock.
SIGN
<ENTER>
Choose the signal type: 2.4G (wireless) or CABL (cable)
WIRE
<ENTER>
Wireless Reset: REST, or KEY desired wireless mode (color coded LED)
CTST
CT01-CT10
<ENTER>
R/G/B/W adjustments for custom color banks 01-10
AUTO
AT01-AT05
<ENTER>
Auto programs 1-5
ATSP
<ENTER>
Auto Speed
CHS1
<ENTER>
Custom program 1
CHS2
<ENTER>
Custom program 2
CHS3
<ENTER>
Custom program 3
SOU1
<ENTER>
Sound Active Mode 1 (color changing)
SOU2
<ENTER>
Sound Active Mode 2 (white strobe)
PROG
CHS1-CHS3
Custom
programs
1-3.
SC01-SC20
20 scenes
for each
custom
program.
R (0-255) SHUT (strobe, 0-255)
G (0-255) AUTO (None, AT01-AT05)
B (0-255) ATSP (speed, 0-255)
W(0-255) TIME (duration, 0-255)
WAIT (before fade, 0-255)
USE (use scene, YES/NO)
INFO
SOFT
Vx.x
Software version information
POW
Current automated overheat protection level (100%/80%/50%)
LOAD
ST L
Restore factory settings
PR L
Restore factory program settings
SEND
YES/NO
Sync settings between fixtures via DMX
