Blizzard Lighting AutoBahn 8 ArtNet User Manual Download Page 3

Page 3

AutoBahn™ 8 User Manual - Rev. A  

 

 

(c) 2014 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box? 

 

• 1 x AutoBahn™ 8: DMX/ArtNet Interface

 

• An Ever-So-Handy Power Cord

 

• This Lovely User Manual

Getting It Out Of The Box 

Glückwünsche! 

You’re on the road to blazing fast bilateral ArtNet/DMX signal 

conversion and more with the AutoBahn™ 8!

With usage of multiple LED fixtures and video mapping, many occasions 

require thousands of DMX channels. It’s important to have fast DMX response 

and proper network load management, and the AutoBahn™ 8 will do just 

that. It not only provides instant response, but also a lower network load. The 

AutoBahn™ 8 will allow you to increase the number of DMX universes and easily 

place DMX universes remotely on any TCP/IP Ethernet network. It can also be 

used as a DMX merger, DMX splitter, or backup device! 

Now that you’ve got your AutoBahn™ 8 (or hopefully, AutoBahn™ 8

’s!

), you 

should carefully unpack the box and check the contents to ensure that all parts 

are present and in good condition. If anything looks as if it has been damaged 

in transit, notify the shipper immediately and keep the packing material for 

inspection.  Again, please save the carton and all packing materials. If a fixture 

must be returned to the factory, it is important that the fixture be returned in 

the original factory box and packing.

Caution!

 

There are no user serviceable parts inside this unit. Do not open the housing or 

attempt any repairs yourself; doing so will void your manufactures warranty. In 

the unlikely event your unit may require service, please contact Blizzard Lighting 

at [email protected].

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll be 

happy to help, honest. 

 

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Email: [email protected]

Disclaimer:

 The information and specifications contained in this document are subject to change without 

notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may 

appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or 

to create a new document to correct any errors or omissions at any time. You can download the latest 
version of this document from www.blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Thomas

1/15/2014

J. Thomas

1/16/2014

Summary of Contents for AutoBahn 8 ArtNet

















Reviews: