10
4.5. Final Inspection Checklist before
Operation
After installing the machine, a final inspection
should be performed by considering the following
checklist;
Any missing components, guards or panels
Removal of the shipping brace
Lost fasteners and fittings, hoses and
conduit
Missing or damaged items
Coolant, oil, or hydraulic leads
Tools and others materials left on saw
Safety measures, general condition and
readiness for use
5
OPERATION
In this section, the functions of the machine will
described to guide the operator to become familiar
with the machine and its components.
5.1 Control Panel
A)
Main Power Switch
The machine is ready when the main power
switch is turned on.
B)
Coolant Pump On/Off
Coolant pump switch on/off via this button.
Caution:
Do not operate the coolant motor while
coolant tank empty. Otherwise, the coolant motor
will be damaged.
C)
Open/Close Switch
Cutting process can be started and stopped with
these buttons.
D)
Blade Speed Arrangement Button
Blade speed can be adjusted 25-90 m/min by this
button.
E)
Emergency Stop Button
The "Emergency stop" push button stops
all
functions
of the machine. The machine will not
function until "Emergency stop button’ is
released. To release the emergency button, turn it
in the direction indicated on its hub.
Caution:
The "Emergency stop" push button does
not disconnect the machine from the main power
supply. To avoid from serious injury or death due
to electricity shock, turn the main power switch off
or disconnect the machine from the main supply
before servicing it.
F)
Bow Down Speed Valve
Bow down speed can be adjusted by this button.
5.2. Blade Changing Procedure
In order to achieve accurate and efficient cuts, it
is important to use a sharp and correct blade for
the material being cut.
1-
Raise the saw frame to its highest position
2-
Turn the hand-wheel to left to loosen the
blade.
3-
Switch off the main power switch of the
machine.
Caution:
Avoid serious injury by turning the
machine's power off at the main switch before
adjusting, servicing, or cleaning the saw.
4-
Open all the wheel covers on the saw
frame.
A
B
C
D
E
F
