Blitz Scion xA Instruction Manual Download Page 2

Page: 2 / 23

Safety Note

■

In beginning

* Please read this throughly and fully understand this instruction manual.
* Please have a factory service manual on hand. Refer to service manual for any addition
procedures not provided in this instruction manual.
* By installing this product, Blitz Co., Ltd. (Japan) will not be responsible for any damages,
injuries, incidential parts and be liable for any type of cost and damages.

* Please acknowledge that Blitz Co., Ltd. (Japan) and any of Blitz Co., Ltd. (Japan)‘s Dealers will
not be liable for any damages to the vehicle or injuries.

* Blitz Co., Ltd. (Japan) has the right to change/upgrade any kits without prior notice.

* Please look through the parts list before the installation of this product. Make sure that all parts
are available before installation. If any parts are missing, please contact your place of purchase.
* Please tighten the nuts/bolts securely with a suitable tool. Please do not over-tighten the bolts.
Over-tightening the bolts may result in damage to the bolts, to the unit itself, and cause operating
malfuctions.

Important Note:

* This kit was produced for a standard stock car. In the case where this kit is installed on a vehicle
other than stock, we are unable to guarantee its fuctional efficiency and durability of the product.
* Please be careful when installing this product, whereas no foreign objects or liquids get into it.
The result of foreign materials getting mixed into the products may cause malfuctions in the
products.
* During installation, incase of any uncertainties, it is important to have a factory service manual
at hand. When there is no techinical assistance, please refer to service manual.
* Before test-driving the vehicle, make sure that everything is fully functioning in the vehicle.
Check fluid levels such as oil, fuel, and water. Driving the vehicle with leaks may result in engine
damage or even car fire.
* This kit requires High Octane fuel. Low Octane fuel may generate knocking, and if knocking
persists, it may result in engine detonation. Please use High Octane gas to prevent such a
situation.
* In the case where the kit is installed, please replace the “stock” spark plugs with “high heat-
range” spark plugs. <We recommend Blitz Iridium 77 Spark Plugs>
* Please do not attempt to disassemble the items within the kit. It may cause a change in
computer pitch settings which may result in engine damage.
* Blitz also recommends the use of intake systems (Sus Power Air Cleaner#26059/Sus Power
Core type LM () to increase response and top-end power.
*Blitz also recommends using a Nur W axle back exhaust system for less bask pressure and
increased flow #67050B/Mt2010xA.
* Remove the EFI fuse for 15 second or more to reset ECU. Reconnect the fuse and check it.
* Let the engine idle for 5-10 minutes until idle settles.
* In the kits that include Fuel Controllers, please do not disassemble it for any reason. Doing so
may cause the pitch settings to falter, which may result in engine damage.
< Installer >
After installation is complete, please be sure to return this instruction manual to the customer.
Before starting job, please be sure to inspect the parts before installation.

■

Please make sure that there are no cracks in the factory hoses and belts. Also the car is in

good running condition and does not need any type of maintance or repair. If the car needs
service please do so before installing the Blitz Compressor kit.
Check and familiarize yourself with all parts provided in this kit before installing.

(2) Application

* Product name:

BLITZ COMPRESSOR SYSTEM

For Scion xA/xB 2004-up Models
Automatic and 5 speed

Online Manual Not For Resale Purposes