REMOTE
Features & Controls
Features & Controls
10.B-TERMINAL (CHASSIS GROUND)
To avoid unwanted ignition noise caused by ground loops, it is
essential that the Amplifier be grounded to a clean, bare, metal
surface of the vehicles chassis.
11.REMOTE POWER ON
To remote wire car stereo. This amplifier is turned "ON" remotely
when vehicle's stereo is turned "ON".
Note: IF YOUR RADIO DOES NOT HAVE +12 VOLT OUTPUT LEAD WHEN
TURNED ON, THE "REMOTE" TERMINAL ON THE AMPLIFIER CAN
BE CONNECTED TO VEHICLES ACCESSORY CIRCUIT WHICH
PR12V WHEN THE CAR IS ON.
12.B+ TERMINAL (BATTERY POSITIVE)
Due to the power requirements of the Amplifier, this connection should
be made directly to the po) terminal of battery. For safety
measure, install an in-line fuse Holder (not included) as close to the
battery po) terminal as possible with an ampere rating not to
exceed total value of fuses in Amp.
13.REMOTE CONTROL INPUT
5
Remote Bass Boost Control
Remote Bass Boost Control : This control adjusts the Bass Boost gain for the
amplifier's speaker output (0 - +18dB)
MAX
MIN
LEVEL
MAX
MIN
LEVEL
