Features & Controls
Features & Controls
1.SPEAKER TERMINAL
2.BASS BOOST CONTROL
By using the BASS BOOST function, bass notes at 45Hz are
emphasized as much as 18dB.
3.PHASE SHIFT SWITCH(0 ~ 180 DEGREES)
Allows you to change the phase of your subwoofer from 0 to 180 degrees
to help compensate for timing differences between mid and sub drivers.
4.VARIABLE LOW-PASS FILTER (50Hz ~ 150Hz)
Adjust variable crossover frequency with control as desired. The
amplifier input circuit filters out everything above the frequency
selected, so only the deepest bass notes are amplified..
5.VARIABLE SUBSONIC CONTROL(15Hz - 40Hz)
6.INPUT LEVEL(INPUT SENSITIVITY ADJUSTMENT)
This control adjust the amplifier's input sensitivity. Input sensitivity is
variable from 200Millivolts to 8 volts. Clockwise increases sensitivity.
Counterclockwise decreases sensitivity.
This knob is not a volume control signal levels. A lower signal level will
require increased sensitivity for full power. A higher signal level will
require decreased sensitivity.
7.LINE INPUT RCA JACKS
These inputs are for signal cables from the source. Always use high
quality shielded RCA cables.
8.LINE OUT RCA JACKS
The LINE OUT allows you to build multiple amplifier systems without
having to use splitter cords to distribute the signal. Now it is simple a
matter of bringing one set of RCAs into the first amplifier, then using
the line out RCA jacks as the feed to the next amplifier.
9.BRIDGED MODE
4
