Blink Marine PKP-2200-SI, User Manual

Page: 13 / 15

Via Montefeltro, 6 – 20156 Milano (MI) – Italy - 13 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com – info@blinkgroup.com PKP-2200-SI_J1939_UM_REV1.0
Example:
Direction Identifier Format Message Data
To
Keypad 18EF2100h Ext 04 1B 77 0A FF FF FF
FF Period set to 100ms
21. Start Demo mode(7Ah)
This message enables the Demo mode function. Demo mode is a special feature that consists in
different LED states for each button pressing. Refer to the appendix “Demo mode instructions”
to try these special features. Disconnect and reconnect the keypad after the enable message to
enter this mode. To exit the Demo mode, send the Disable Demo mode command or another
command message.
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 7Ah Demo mode
Byte 3 XXh XX:
00h Disabled (Default)
01h Enabled
Byte 4,7 FFh Not used
Example:
Direction Identifier Format Message Data
To Keypad 18EF2100h Ext 04 1B 7A 01 FF FF FF
FF Demo mode enabled
22. Set backlight level at startup (7Bh)
This message sets the value of the backlight at keypad power up. The value can be set from 0 to
3Fh from 0 to 100% of the brightness range.
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 7Bh Set backlight at startup
Byte 3 XXh XX: Value
From 00h (0%) to 3Fh (100%)
Byte 4,7 FFh Not used
Example:
Direction Identifier Format Message Data
To
Keypad 18EF2100h Ext 04 1B 7B 06 FF FF FF
FF Backlight at startup
12,5%
23. LED dim at startup (7Ch)
This message sets the value of the indicator LED brightness at keypad power up. The value can
be set from 0 to 3Fh from a minimum value to 100% of the LED dimming range.
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 7Ch LED dim at startup