Inserting an SD card
SD card slot is located above the right-hand side SIM card slot. To insert an SD card,
you need to open the cover of the slot first. Push the metal cover of the SD card slot
to the right, until you hear a click. Carefully lift the cover upwards, no force is
needed to do so, if you feel resistence while lifting the slot, then the slot is not
opened properly. Insert the SD card to the opened slot, contacts facing downwards
and to the right. Close the metal cover and push it downwards. While pushing on
the cover, slide it to the left to lock it in place. You should hear a click once the
cover is locked.
Inserting a battery
Locate a notch on the edge of the battery. This notch should point towards you and
be on the side of the battery which is facing upwards. Slide the battery from top to
the bottom into its housing, it should fit snugly. To remove the battery use your
fingernail to hook it from the top and pull upwards.
Switching on the phone
To switch on the phone, press the
back button
for at least three seconds. The
phone will play a start-up melody. After the first item in the main menu -
call
- is
announced, the phone will be ready for operation. Registration to the mobile
network may take up to a minute after the phone is switched on.
Interactive tutorial
An interactive tutorial automatically starts, when the device is powered on for the
first time. This tutorial has to be completed before you can use the phone. The
tutorial is later available in the menu item called
Manual
. The interactive tutorial
will teach you how to operate the phone. Pressing any button during the tutorial will
tell you what the button is used for. Some of the buttons have two functions,
depending on whether you performed a short press of the button or a long press.
Once you are done with the training, you can end the tutorial by pressing the
back
button
and a
confirm button
afterwards.
Operating the phone
This section of the user guide describes how the device can be controlled, either by
making use of the phone's buttons or using your voice.
Volume buttons
The two topmost buttons on the sides of the keypad are the
volume buttons
.
•
Short press of either of the volume buttons changes the current volume. The
volume button on the left side
decreases the current volume and the
volume button on the right side
increases the current volume.
•
Long press of either of the
volume buttons
anywhere, except when inputting
text, will start voice control.
•
Long press of either of the
volume buttons
, while inputting text, will start
voice dictation.