Installation Guide
Roman Blinds
Additional Information
Removing the fabric for cleaning
The fabric attaches at the front
with velcro, simply peel the fabric
away from the headrail.
At the back, the cords attach to the fabric using clips, which double as a
child-safety feature. These clips are in two parts, and can be easily unclipped
to separate the cords from the fabric.
If you need to remove the fabric, to take it to a dry-cleaner for example, then that’s easy.
Raise
Lower
Pull down on the front part of the chain to lower the blind, and pull down on the rear
part of the chain to raise the blind.
Operating the blind
Top Tip
If you find at any point that the blind has fallen to one side, the likelihood is that this has
been caused by a simple mix-up with the controls, in that they may have been pulled the
wrong way to either raise or lower, which can cause the cords to roll up unevenly. To fix this,
simply use the front of the chain to fully lower the blind, then continue pulling the chain until
it raises to the top. The blind should even itself out as you do, and you can prevent the same
issue occurring again by making sure the chain is always pulled in the correct direction from
that point forward.
