OPERATION INSTRUCTIONS
WAND OPERATION
To tilt blind:
Twist the wand to tilt the slats in either
direction.
Tilt blind horizontal before raising/lowering to extend
the life of the blind.
To lower blind:
Move lift cord towards middle of the
blind pulling down gently until cord lock releases.
To raise blind:
Pull lift cord downward until blind
reaches desired height.
To lock cords:
Pull lift cord towards the outside
of the blind and release. Cord will lock automatically.
PULL OPERATION
To tilt blind:
Pull on required tilt cord tassel to tilt
slats to the open/closed position. Tilt blind horizontal
before raising/lowering to extend the life of the blind.
To lower blind:
Move lift cord towards middle of the
blind pulling down gently until cord lock releases.
To raise blind:
Pull lift cord downward until blind
reaches desired height.
To lock cords:
Pull lift cord towards the outside of the
blind and release. Cord will lock automatically.
MAINTENANCE
The product is maintenance free however we recommend that regular visual checks are completed to
ensure that no components have been damaged, which could result in operating difficulties and/or
cause a safety risk. If any maintenance is required we recommend that the work is carried out
immediately, by a reputable blind company.
WARNING
Young children can be strangled by loops in pull cords,
chains, tapes and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords
out of the reach of young children. Cords may become
wrapped around a child’s neck. Move beds, cots and
furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist
and create a loop.
Page 5 of 6
PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
