FITTING INSTRUCTIONS 3/3
BREAKAWAY SAFETY TASSEL
Use suitable screws to attach the safety cleat securely
to the wall.
Wrap the cords around the cord cleats in a figure of 8.
When the cords are fully accumulated ensure they are
secure so when any cord is pulled no excess cord is
released.
Breakaway safety tassel is pre-fitted to the lift cords
so that when a horizontal force is applied to the cords
entering the condenser it safely breaks away
eliminating any hazardous loops.
If the breakaway safety tassel is pulled apart:
Untangle and untwist cords.
For 2 cords
: Press the breakaway safety tassel together until it is fully
closed.
For 3 cords
: Place the loose cord in the opening in one half of the
breakaway safety tassel and press the breakaway safety tassel together
until it is fully closed.
If there are any doubts that the breakaway safety tassel has not been
re-attached correctly it can tested by placing your arm between the
cords and pressing downwards. The breakaway safety tassel should
break apart with minimal force, if it does not breakaway tie cords out of
reach of children and contact a reputable blind company to repair the
blind.
Page 4 of 6