Quad Sine LFO shape
Sine wave LFO shape of one voice
Quad Sine Shape
Each color represents the LFO shape of a different voice. The LFO sync setting must be
turned on for the quad sine shape to line up symmetrically as seen above. Using it in
unison mode can allow for cross fading between each voice as well as a variety of other
possibilities.
Line 2
: Speed of LFO 1
In sequencer mode, the speed of LFO 1 is linked to the speed of the sequencer
With external midi sync, the speed can control the clock division of LFO1 relative to the
incoming midi clock signal in half notes, thirds, quarter notes, sixths, eights, and
sixteens
TIP
The clock division can be manually adjusted in MIDI sync or internal sync for
syncopated rhythms.
Line 3
: LFO 1 modulation destination
(filter cutoff, oscillator shape, oscillator 1 pitch, oscillator 2 pitch, ring modulation
level, LFO 2 speed, oscillators 1 and 2 pitch, oscillator 2 harmonic series, last
knob turned)
The harmonics destination modulates the pitch of oscillator 2 so that the pitch scans
through the harmonic series
TIP
Using this in combination with the ring modulator can create some unique
sounds
10
