FOLDING AND UNFOLDING
UNFOLDING OLDER YEAR MODEL
Opening the Solax Transformer from the folded mode
works in two different ways, depending on your devi
-
ce’s Year model. Folding works the same regardless of
the Year model.
1. Press down on the release lever in the center of the handlebar post.
NOTE! Do not pull the lever!
2. While still holding the handlebar pillar while pressing the release lever, pull the seatback
back with one hand.
3. When the device is opened approximately halfway, you can release the release lever and
press down on the center of the frame. Press down on the frame until the device is fully
straightened.
1.
2.
3.
UNFOLDING NEWER YEAR MODEL
1. In the newer model, opening is started by pressing the long lever
at the folding point of the frame.
2. The seat backrest is then pulled outwards as in step 2 of the ol-
der model opening.
3. When the device is opened halfway, press down on the device
frame, as in step 3 of opening the older model.
4
FOLDING
Pull the long lever of the frame fold point upwards (
fig 1
), to move the front and rear of the
scooter closer to one another while lifting the center section
(fig 2
). Lastly, push the handlebar
pole and the seat toward each other until the device locks into folded position (
kuva 3
).
1.
2.
3.
Summary of Contents for Solax Transformer
Page 1: ...SOLAX TRANSFORMER MANUAL ...