Step Eleven:
Repeat process with second Back Support Leg (E). The barrel nut
hole should face up, assembling so that the two Back Leg Supports
meet. Secure with
4
" Bolt (
r
) and a Barrel Nut (
q
). Tighten using
the Allen Wrench (
b
).
Step Twelve:
Insert
2
3
/
8
" Bolt (
y
) through one of the holes in the bottom Back
Support Leg and the slotted area of the top Back Support Leg, put
the Slide Guide (
x
) over the bolt and into the slotted area. Secure
with
1
7
/
8
" Black knob (
w
). Adjustments made here will change
angle of the easel. Repeat with second knob and bolt.
Black
slide.
Step Thirteen:
Attach the Mast (C) to the Frame
Supports using the three
2
1
/
8
" Bolts (
o
).
The Mast has pre-drilled holes spaced
about
20
" apart. The hole closest to the
end should be nearest the floor. Choose the
height you would like the Mast positioned,
place the three Bolts through the front of
the Mast and Frame Supports, then
attach the Washers (
m
) and Black
Knobs (
l
) on the back side. The recessed
holes should face forward.
Pg 5