Step Seven:
Turn frame over and secure the supports by inserting a
2
" Bolt (
j
) through hole
on the side of the Frame. Position a Barrel Nut (
i
) into the hole on the top side of the
Frame Support to receive the bolt, and tighten using the Allen Wrench (
b
). Repeat on
other
five
Support ends.
Note: It is helpful to have a screw driver to hold
the Barrel Nuts in place while tightening the bolts.
Step Six:
Fit Frame Supports (G, L
&
M) onto Wooden Dowels now in the Easel
Frame. Note: Top Frame Support (G) goes on the opposite end of the
pre-drilled holes used to attach the frame to the base.
Pre-drilled holes to connect frame to base
Step Eight:
Using
2 - 1
5
/
8
" Bolts (
n
),
2
Washers (
m
),
and
2
Black Knobs (
l
), secure the Easel Frame
to the Metal Brackets attached to the Base.
Washers will fit between the inside Easel Frame
and Metal Bracket as shown below.
Tap the face of each bolt into the
wood to assure a tight fit.
Note: The position of the Frame & Supports
must match picture shown to proceed.
Pg 3