background image

 

9

CLEANING OF THE JAR

•  Put 1L of hot water and  .25ml of detergent (kitchen detergent etc .) in the jar .

•  Close the lid of the jar tightly . Put the jar on the motor and push the P-button 

(Pulse-button) for about 15 seconds .

•  Clean the detergent on the jar and the cover with clean water .

•  Do not use the dish sponge when cleaning the detergent . Use a soft piece of 

dishcloth or ordinary cloth to wipe out the detergent .

CAUTIONS FOR THE USAGE OF THE DISHWASHER

•  When using the dishwasher to clean the jar, put the jar in the top part .

•  You can use the jar of the blender in the dishwasher with the maximum 

temperature of 104 Celsius degrees (or 220 Fahrenheit degrees) .

Do not keep the jar of the blender for more than five minutes under the water . 

(When the bearing part of the jar is continuously contacted with water, its 

lifecycle can be reduced .)

6-2. CLEANING OF THE MOTOR OF THE BLENDER Q-SERIES

IN-COUNTER BLENDERS (ICB)

1 . Make sure the main power switch is off and motor is unplugged before 

cleaning .

2 . When necessary, wipe the metal top and sides of the blender base clean 

with a damp rag . Mild cleaners like WINDEX® may be used . 

3 .  Remove the rubber gasket and clean as necessary .

4 . If needed, the drive socket can be cleaned using a toothpick or cotton swab .

CLEANING TIPS AND CAUTIONS

•  Do not use abrasives or stiff brushes to clean the blender base, jar, or sound 

enclosure as this will dull or scratch the surface .

•  Do not use a water jet of any kind to clean the blender base .

•  NEVER submerge the blender motor in water—THIS WILL VOID WARRANTY .

7. WARRANTY & TROUBLE SHOOTING

7-1. WARRANTY

•  Warranty for the Motor

ABC

1 year or 20000 cycles

Q-Series

1 year or 15000 cycles

SpaceSaver

1 year or 10000 cycles

[The one which comes earlier between the period of 1 year and the number of 

15000 cycles (in case of Q-Series) according to the purchasing or selling date 

is used .] 

•  WARRANTY FOR THE JAR: The following warranty conditions are applied 

for the breakdown of the jar and the internal bearings .

(The model number of the jar is under the NSF logo of the jar .)

•  BLADE: The stainless-steel blade is subject to the warranty when it is broken 

during the lifecycle of the jar . As it is used over and over, the blade can 

Summary of Contents for Q-SERIES

















Reviews: