10
SPEED UP/SPEED DOWN
: Pressing the UP button will start a speed cycle for 50
seconds. During this time press or hold down the UP/DOWN arrows to control up to 9
speeds at which the blender can operate.
6.3 AUTOMATIC AND CUSTOM CONTROLS
PRESETS:
The four numbered buttons on the left side of the touchpad operate four
customizable pre-selected blend cycles. To select one of these presets simply press
the designated button.
SELECTING A CYCLE FROM THE CYCLE MENU:
To access the Cycle Menu
press the SELECT CYCLE MENU button. The Menu Mode LED will light. The first cat-
egory to appear on the LCD display is BEVERAGES. Continue pressing or hold down
the SELECT CYCLE MENU button to cycle through the cycle categories.
Once the category of cycles has been reached, press or hold down the arrow keys to
scroll through the cycles listed in that category. To use this cycle, press the START/
STOP button. The LCD display will show the cycle name and the time remaining
within the cycle.
After a cycle has completed within the Menu Mode, the SELECT CYCLE MENU and
UP/DOWN arrows can be used to select another cycle.
Press the PULSE button to exit the Menu Mode.
PULSE CYCLES:
Unlike the other cycles, the FOOD PROCESSING category cycles
(Chop, Whip, and Puree) function similar to the pulse function. Use the START/STOP
button as you would the PULSE button by pressing for the desired duration and
releasing when complete.
PROGRAMMING A PRESET:
Enter the Menu Mode by pressing the SELECT
CYCLE MENU button. Using the SELECT CYCLE MENU and UP/DOWN arrows navi-
gate to the cycle you wish to program onto the preset. When the name of the desired
cycle appears on the LED display, press and hold the desired preset button for two
seconds. The display will change to read the name of the existing cycle on the preset,
then change to read “ProgrammingBttnX” where “X” is the number of the preset.
When the programming is complete, the display will read “Program Complete”. The
blender will exit menu mode automatically and the preset is available for use.
If the blender fails to program the button, the display will read, “Program Failed”. If
you continue to receive this message after multiple attempts to program your blender,
contact Blendtec customer service at 800-253-6383 for assistance.
Summary of Contents for Home Blender
Page 1: ...Home Blender Owner s Manual and User Guide ...
Page 2: ......
