Blendtec Classic, Owner'S Manual

Page: 5 / 40

ENGLISH
8 9
LOADING THE JAR
For best results, always load the ingredients to the jar in this order:
1. Liquids (e.g., water, juices, milk)
2. Soft solids (e.g., peanut butter, bananas and other soft fruits, powders)
3. Hard, dense, or frozen items (e.g., carrots, frozen strawberries, ice)
Loading the jar properly helps reduce cavitation. For more information on cavitation, please refer to the Troubleshooting section.
Note: When using the Blendtec GO accessory, reverse the loading order, adding ice and hard ingredients to the jar first, then
soft ingredients and liquids.
Hard, dense or frozen items
Soft solids
Liquids
CLEANING THE JAR
Before using the jar for the first time (and each time after blending), follow these easy cleaning tips:
1. Add a cup (240 ml) of water and drop of dish soap to the jar.
2. Place the jar on the blender; press Clean cycle or pulse for 10 seconds.
3. Remove and rinse with warm water.
To clean the motor base, simply wipe with water or mild dish soap. Using other chemicals may cause cosmetic damage to the blender base.
When using the Blendtec GO accessory, be sure to remove the gasket from the micronizer and clean both thoroughly after each use.
For more information, please visit www.blendtec.com.