11
Soldering
Before you begin, make sure that all of the
components are in the correct places and that
none of the leads are touching.
One you’re done, clip off the pots’ pins.
If you get some unsightly brown dots and want
to get rid of them, wait 15-30 minutes for them
to dry. Then carefully scratch them off with a
plastic disposable knife.
12
Once the bottom is fully soldered, there are
just a few things left to do before you can
make some boomclappoonnnchpewwwwwss.
Insert the 1/8” jack and the slide switch from
the bottom side. Fold the outside pins of the
switch outward with your screwdriver.
13
Last is the battery holder.
Use your pliers to pop and bend the pins out
of the plastic so they look like this.
