12
NOTES:
The screenshots shown in this section are indicative only. The
actual diagram on different versions of APP, iOS and Android
may differ.
During the use of the TrailCam APP (Referred to as APP),
please grant the APP access to Wi-Fi, Bluetooth, storage,
location and camera of your device, and enable the Local
Network (if on iOS14), which are necessary to take pictures
and videos.
8.2. Enable Wi-Fi and Bluetooth
Enable Wi-Fi and Bluetooth on your mobile phone before
opening the APP. This step is optional, however it can speed
up the connection between APP and camera.
8.3. Add Your Camera
Make sure your camera is in
ON
mode, and that it is near you.
To get a stable connection, please get close to your camera no
farther than 45ft away with no obstacles between you and the
camera, such as walls, glass doors etc.
Open the APP, tap the orange stripe on the top to add your
camera:
Figure 8: Enable Wi-Fi and Bluetooth
