Blaze BLZ-4LTE Page 37 Use & Care Manual Download

Page: 37 / 41

Blaze Outdoor Products Instructional Book

Page |

Version 1.1

Warranty Registration

If you have purchased a Blaze Series Grill you must register your product within 30 days of purchase to validate the warranty

and maintain your original receipt to get parts for the appliance. You may register your appliance at

blazegrills.com

by selecting

Support, and then selecting Register your Product. You may also fill out page 4 0 - 4 1 and mail to the address located at the

bottom of the form. The warranty is for original owners only at the original site of delivery and cannot be transferred to

new owners. You must retain your sales slip or invoice. Blaze Grills are warrantied for normal single family/residential use only.

Installation, repair and maintenance work should be performed by an authorized service technician. Work by unqualified

persons could be dangerous and will void the warranty. All Natural and LP Gas appliances must have a qualified installer

complete the installation for the warranty to be in effect. The incorrect installation of the Blaze gas appliance will void the

warranty. Please call Blaze Outdoor Products for more information on correct installation of the gas appliance.

Blaze Outdoor Products shall not be liable under this or any implied warranty for incidental or consequential damages

and Blaze Outdoor Products liability is limited to the purchase price of the appliance only. This warranty gives you

specific legal rights, and you may also have other rights, which may vary from state to state. This warranty is applicable in

the United States and Canada only. No one else is authorized to perform any obligations under this warranty.

Improper Maintenance, high cooking temperatures, excessive humidity, chlorine, fertilizers, lawn pesticides,

chemicals, and salt can affect the Stainless Steel components and for these reasons, the warranties DO NOT COVER

DISCOLORATION, SURFACE RUST, OR RUST, unless there is a loss of structural integrity / rust through of the

appliance components. This warranty covers defects in material and workmanship.

WARRANTY ON PARTS EFFECTIVE 3-15-16



Main Burners

–

Lifetime (Parts Only)



Cooking Grids

–

Lifetime (Parts Only)



Body

–

Lifetime (Parts Only)



Flame Heat Zone Seperators

–

Lifetime (Parts Only)



Warming Rack

–

Lifetime (Parts Only)



Valves- Lifetime (Parts Only)



Ignition, Electronics, and Lighting systems

–

1 year (Parts Only)

Consumers are responsible for all labor and shipping cost associated with warranty parts. All warranty claims are subject to

manufacturer review. Please make sure to have your sales receipt information and product serial number located on the outside

left side panel of the appliance. All replacement parts can be purchased through your local stocking dealer.

Summary of Contents for BLZ-4LTE










































Search results

Summary of Contents for BLZ-4LTE

Reviews:

Related manuals for BLZ-4LTE

Brands by name

Popular brands

Blaze BLZ-4LTE, Use & Care Manual

Search results

Summary of Contents for BLZ-4LTE

Reviews:

Related manuals for BLZ-4LTE

Brands by name

Popular brands