7
Operation step 2:
Lift the bottom of the unit as picture 3
Then use the screwdriver to take out the screws which point out in picture 3. Loosening lower front foot
which point in picture 4 about 2.5mm to 3mm
Picture 3
Picture 4
Noted: Do not loosening the lower front foot
too much, or it will easy to fall off.
Operation Step 3:
Tilt the unit forward slightly and make sure the unit is a little higher than the Anti-Tip Bracket when
moving the appliance to the final position.
Slide the appliance into position and make sure the leg engages the anti-tip bracket.
Noted: If the unit is relocated, the bracket must be removed and installed in the new location.
