Version 1.04
March 2011
APEX cbt
Page 8
www.blazeking.com
Installation is to be performed by a qualified installer
Comply with all local codes and regulations.
Never operate a furnace that has been improperly installed.
DO NOT USE CHEMICALS OR FLUIDS TO START OR FRESHEN A FIRE. Keep all flam-
mable fluids well away from the furnace.
RISK OF FIRE OR EXPLOSION - DO NOT BURN GARBAGE, GASOLINE, NAPHTHA,
ENGINE OIL, OR OTHER INAPPROPRIATE MATERIALS.
Combustible materials, including fire wood, must not be stored within the furnace in-
stallation clearances or within the space required for fueling, ash removal, and other
routine maintenance operations.
Never operate the furnace unless you are sure the smoke pipe and chimney are in safe
condition. Flue gasses may contain carbon monoxide which is poisonous.
Keep smoke pipe and chimney clean to prevent a chimney fire. Inspect and clean flues
and chimney regularly. In the event of a chimney fire turn down all thermostats and
close off combustion air. Call a fire department if necessary. Have a clearly under-
stood plan to handle a chimney fire.
CAUTION: CLEANOUT OF THE HEAT EXCHANGER, FLUE PIPE, CHIMNEY, AND
DRAFT INDUCER IF USED, IS ESPECIALLY IMPORTANT AT THE END OF THE HEAT-
ING SEASON TO MINIMIZE CORROSION DURING THE SUMMER MONTHS, CAUSED
BY ACCUMULATED ASH.
CAUTON: Hot Surfaces
- Keep children away
- Do not touch during operation
- Maximum draft marked on nameplate
SAFETY PRECAUTIONS
