WIRING DIAGRAM
4
Diagram 2 (Low Level Input -Speaker Input)
Use the supplied cable and wire harness to connect the outputs correctly by referring to Diagram 1 & Dia-
gram 2. Use only one of the audio inputs, otherwise, it may lead to audio interference.
1.
Diagram 1 (High Level Input -Speaker Input)
With control via the High Level Inputs, first the speaker harness will need to be spliced the wire side of
the splitter. Then connect the white wire to the left (+), white/ black wire to the left(-) (it can be identified
whether the left or right channel via the attached harness label), grey to the right (+), and grey/black to the
right (-) corresponding vehicles wires, and finally plug the supplied harness into the High-Level Inputs/power
matching connector on the amplifier panel of the subwoofer.
With control via the Low Level Inputs (also referred to as RCA Inputs), connect the blue colour remote wire
from XLf 320 AW to the vehicle’s head unit so XLf 320 AW will turn on and off with systems.