Proper system planning is vital in order to maximize
the device’s performance and road safety. Plan
your installation carefully to avoid compromising
performance reliability of the system. Consult an
authorized Blaupunkt dealer for installation or rep-
aration. Read the manual carefully before operating
the device for the first time.
Safety Notes
Ensure to follow below safety notes during installa-
tion and wiring connection : -
•
•
•
Installation and Connection Instructions
•
•
•
Voltage Supply
•
•
•
•
Integrated Fuse
The integrated fuse in the device protects the out-
put voltage and the entire electrical system in case
of malfunction. Do not replace damaged fuse with
higher current.
Switching On/Off
This device will automatically turn on if a music
signal is detected. The device will also automatically
turn off if no music signal is received.
INTRODUCTION
Remote Control
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential-
damages to property or life and whatsoever arising
out of or connected with the use or misuse of our
products.
USA & CANADA: This product is not intended for sale
in the United States and Canada. If purchased in the
U.S. or Canada, this product is purchased on as-is
basis. No warranty, whether expressed or implied is
provided in the U.S. or Canada.
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time
without any notice.
1
Ensure positions of the holes are nowhere near
the vehicle component to avoid any damage
during drilling.
Ensure cross section of the cable is no less than
2.5mm2 if the positive and negative cables are
too long.
Incorrect installation may result in malfunction of
the device or the car sound system.
Select a dry and well-ventilated location to install
the device.
The device must not be installed in overly
exposed location such on the rear shelf, rear seat
etc.
The installation location must be suitable for
screw holes and have stable ground support.
Use the supplied power extension cable to con-
nect to the positive battery terminal.
Firmly and carefully connect the ground lead to a
bare metal point on the vehicle chassis.
The control of the device should be a two-chan-
nel control, either via the preamplier outputs or
the loudspeaker, output of the car sound system.
A control solely via the right or left channel is
also possible since the low-frequency portion of
the music is generally identical on both channels.
GAIN
BASS BOOST
LPF
PHASE
1
2
3
4
