50
Cancelling mute
To cancel mute,
➮
briefly press button
3
while in
mute mode.
Playback is resumed.
Telephone audio / navigation
audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
If a traffic information message is re-
ceived during a telephone call or whilst
a navigation announcement is being
made, the traffic message will only be
played after the call or voice output is
finished.
You can set the volume level at which
telephone calls and the navigation voice
output will first be heard.
➮
Press the MENU button
8
.
➮
Keep pressing the or button
:
until “TEL/NAVI VOL” appears
in the display.
➮
Set the required volume using the
and buttons
:
.
➮
When you have finished making
your changes, press the MENU
button
8
or OK
;
twice.
Note:
Using the volume control
2
, you can
directly adjust the volume of the current
telephone call or current navigation
voice output whilst it is being outputted.
Confirmation beep
For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds,
e.g. when storing a radio station to a
station button.
ADJUSTING THE VOLUME
