Blaupunkt W46-63G-GB-FTCU-UK, User Manual

Page: 7 / 25

8
Attaching the stand
To complete stand installation you will need a Philips
screwdriver
1. Insert 66mm plastic ring (b) (making sure the notch is facing
upwards) into the hole in the stand(c)
2. Slot the stand (c) into the TV neck (a) with 66mm plastic ring
(b) inside
3. Align 68mm plastic ring (d) making sure the notch is facing
downwards with the hole at the bottom of the TV stand
4. Align the holes in metal plate (e) with the holes in the
bottom of the TV stand
5. Secure the stand using 7 screws (f )
Wall mounting the TV
This television requires a VESA 400 wall mount,
or equivalent.
TV VESA Standard
46“ TV 400 x 400
1. Remove the four screws highlighted below.
2. The wall mount can now be easily attached to the mounting
holes on the rear of the TV. These holes are indicated in the
picture below.
For optimum viewing, if wall
mounting the TV higher than
eye level, the TV should be tilted
downwards so that the TV’s screen is
‘face on’. See fi g 1 and 2
Attaching / Detaching the Stand
Important - If you mount this television on the wall, use only the screws holes for wall mounting. Using other screws can cause
irreparable damage to internal components.
fi g 1
fi g 2
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Viewing angle
Viewing angle
a
b
c
d
e
f