Blaupunkt TravelPilot E1 Operating Instructions Manual Download Page 48

Page: 48 / 96

INTRODUCTION

NAVIGATION

RADIO

CD / MP3

CD CHANGER

SETUP

APPENDIX

To define the route options,

press and hold down the NAV button

for longer than 2 seconds.

✔

A selection menu appears in the display.

Mark and confirm the

ROUTE OPTI

ions menu item.

✔

The menu for setting the route options appears.

Select the route option that you want to change.

Press the OK button

;

to change the setting.

✔

If the route option is activated, a filled-in circle/square appears next to it.

Notes: The

FAST

SHORT

and

OPTIMUM

route options are mutually

exclusive. If you activate one of these options the other two will be
deactivated.

If you want to close the menu,

press the ESC button

twice.

✔

If no navigation session is active, the audio source will be displayed again. If
a navigation session is active, the navigation display appears again and the
system recalculates the route.

Note: The specified route options remain active until they are
changed again.

TRAFF. JAM

ROUTE OPTI

NAVI

NAV

TMC

DYNAMIC

FAST o

SHORT o

OPTIMUM

ROU=E OP=ION

NAV

TMC

FREEWAY

TOLL RD

FERRY

ROU=E OP=ION

NAV

TMC

Summary of Contents for TravelPilot E1

































































































Search results

Summary of Contents for TravelPilot E1

Reviews:

Related manuals for TravelPilot E1

Brands by name

Popular brands

Blaupunkt TravelPilot E1, Operating Instructions Manual

Search results

Summary of Contents for TravelPilot E1

Reviews:

Related manuals for TravelPilot E1

Brands by name

Popular brands