18
If you wish to listen to a station with
this PTY,
•
press / to start seek tuning op-
eration.
If the system is unable to find a station of-
fering the selected program type, the dis-
play will show “NO PTY” and a beep tone
will be released. The station received be-
fore starting seek tuning will be tuned in.
You can assign different program types to
each preset position. Please refer to the next
chapter “Storing program types”.
b) Using the << >> buttons of the rocker
switch
When PTY is switched on, you can se-
lect a program type using buttons <<
>>.
•
Press << or >>; the program type
selected last will be displayed for
three seconds.
•
During this period press >> (for-
wards) or << (backwards) to select
the desired type.
•
Press << or >> as many times as
required.
If you wish to listen to a station offering
the selected PTY,
•
press / to start seek tuning op-
eration.
If the system is unable to find a station of-
fering the selected program type, the dis-
play will show “NO PTY” and a beep tone
will be released. The station received be-
fore starting seek tuning will be tuned in.
Storing program types
One program type was assigned to each of
the preset buttons 1-6 at the factory.
If desired, you can also store other availa-
ble program types.
To do so, make sure that “PTY” lights up in
the display.
•
If necessary, press the PTY button to
switch on the function.
•
Select a program type using buttons
<< >> and
•
hold down the desired preset button
(1-6) until you hear a beep.
Now the selected program type can be re-
called by pressing this preset. For this the
PTY function must be active.
Scanning stations with PTY-SCAN
Condition: “PTY” must appear in the display.
•
Press the SC button.
All received stations offering the selected
program type will be scanned.
To switch off PTY-SCAN:
•
Press SC once again.
Emergency Alert System
Your RDS tuner is also able to automatical-
ly receive any RDS emergeny announce-
ments broadcast during extraordinary cir-
cumstances.
When the PTY feature is on, if your unit
received such a signal, the radio would flash
an alert message and switch to the RDS sta-
tion broadcasting the emergency announce-
ment, even if you are using a different source
(such as CD), increase the volume to the
level set under DSC (TA volume), and re-
ceive the message.
Notice:
As earlier mentioned, these functions are
currently only supported by a limited number
of RDS stations.
Toronto RDM126 us-gb®
24.04.2002, 14:33 Uhr
18
