13
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Be sure that “LED ON” is adjusted in the
DSC mode.
If required, please refer to chapter “DSC
programming - LED”.
Turning off the blinking LED
When you insert your KeyCard, the LED is
automatically turned off until the card is re-
moved and the ignition turned off, assum-
ing the unit is connected as described in the
installation instructions.
If you do not want the tongue to blink at any
time, simply access “LED” in the DSC menu,
and press << or >> to turn in off.
Care of your KeyCard
For a proper function of the KeyCard it is
important that the contacts are free from any
foreign particles. Avoid direct skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab soaked with alcohol.
Removing the KeyCard
Never pull out the KeyCard directly!
•
First, slightly push in the KeyCard.
This releases the card and puts it in the
proper position for being removed.
•
Now you can pull it out.
Replacing a KeyCard
1. Insert the remaining KeyCard and turn
on the set.
2. Press the DSC button and select
“LEARN KC” with / .
3. Press << or >>.
The display will switch to “CHANGE”.
4. Push in the KeyCard. The card is re-
leased and put in the proper position
for being removed.
5. Remove the first KeyCard and insert
the new one while “CHANGE” is still
being displayed.
After the display indication “READY” or
“LEARN KC”,
6. press DSC.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used for
the set.
When trying to “train” a third one, the ac-
cess authorisation for the KeyCard not used
for the “training” process will be deleted
automatically.
Loss of both KeyCards
Please contact your dealer or in USA call
1-800-920-2121.
Displaying the radio pass data
Using the “Blau” KeyCard supplied with your
set you can have the radio pass data such
as the model name, product number (7 6 ...)
and serial number indicated on the display
panel.
Please refer to chapter “DSC programming
- READ KC”.
Optical indication for extra
security
Blinking KeyCard tongue
When the vehicle is stationary and the Key-
Card removed, the KeyCard tongue can be
switched to blink for extra anti-theft secu-
rity.
For this it is necessary that the positive pow-
er supply line and the per12 V lead
are connected such as described in the in-
stallation instructions.
Toronto RDM126 us-gb®
24.04.2002, 14:33 Uhr
13
