Blaupunkt SB X50e, Instruction Manual

Page: 48 / 52

SB X50e
the remote control to enter the normal status. Press the button on the remote
control once again to keep power in standby status.
B. VOLUME Selection
1. Press the VOL+ button on the front panel of the main unit (or VOL + button on the
remote control) to increase the sound output.
2. Press the VOL- button on the front panel of the main unit (or VOL - button on the
remote control) to reduce the sound output.
C. TREBLE Selection
1. Press the button on the remote control to increase the treble level.
2. Press the TREBLE - button on the remote control to decrease the treble level.
D. BASS Selection
1. Press the BASS + button on the remote control to increase the bass level.
2. Press the BASS - button on the remote control to decrease the bass level.
E. MUTE Selection
1. Press the MUTE button on the remote control to cut the sound output (silent mode).
F. RESET
1. Press the RESET button on the remote control and it will reset all settings to factory
default settings including main unit output and sound bar output.
G. Bluetooth Selection
1. Please press the “INPUT” button on the remote control: the speaker will display “BT”
on the front display which means that Bluetooth mode has been selected. Please
use any Bluetooth capable device to connect with the Sound bar. The sound will be
delivered from the sound bar when your Bluetooth capable device is connected to
the SB X50e.
2. You can press PREV and NEXT button to achieve previous and next tracking
selection during Bluetooth playing mode; press PLAY/PAUSE button to play and
pause music listening; press STOP button to disconnect the Bluetooth with other
device.
Notes :
a. When the Bluetooth of sound bar system is ready to pair with others, a notice sound
will come out from speaker. And another beep notice sound will come out from the
speaker once the pairing is succeeded.
b. Please kindly note that the sound bar system may work with most compatible
Bluetooth devices. Anyhow it may not work with all Bluetooth devices due to
different Bluetooth device design and solution in the market etc..
the system: the standby indicator will light up. Then press the STANDBY button on
A. Switch On/Off the Product
1. Before turning on the system, please connect it according to the system connection
instruction (above).
2. Plug and connect AC power supply with sound bar and subwoofer each.
(Caution: Power source must be consistent with this product.)
3. Press on the POWER switch button on the Rear Panel of the main unit to switch on
48