Blaupunkt SB X50e, Instruction Manual

Page: 46 / 52

SB X50e
If there is no sound from the subwoofer while the sound bar is used together with the
subwoofer. Or if noise or no-sound arise when two or more than two units are being used
at the same time (because of the electromagnetic disturbance caused by the same
product frequency) these problems can be solved by following procedures:
1). Switch off the power of the sound bar and the subwoofer.
2). Switch on the power of the subwoofer first: it will be in the waiting process of
coding. Then switch on the power of the sound bar and press the standby button: it
will be in working conditions. Within 15 seconds, the auto coding and frequency
hopping will be completed. The time between switching on the power of the
subwoofer and to power on the sound bar should be within 15 seconds. Otherwise
the auto-coding and frequency hopping will fail.
3). After have been coded successfully there is no need to operate the coding process
anymore. The machine will automatically memorize the IP address and frequency.
Important note :
a. The 2.4G wireless frequency can be used in all EU and EFTA countries.
b. If the wireless subwoofer cannot access to the sound bar pairing, or no output from
subwoofer due to other frequency impact; please try to switch off the sound bar and
subwoofer, and switch on again according to above procedure. Or you can move it
to other place for playing.The LED light on subwoofer will in blue color after the
wireless subwoofer has paired successfully with sound bar.
Wireless Operation Guide
46