Reverse Camera
Display Monitor/Car Radio
Remove protective film from camera lens before use.
Take extra precautions when setting up the connection near petrol tank and wires.
Connect Red Wire with reverse light.
3
INSTALLATION DIAGRAM
Attention
•
•
•
4
a) Rear Camera
b) Front Camera
Red Wire
Display Monitor/ Car Radio
Display Monitor/ Car Radio
Black Wire (Ground)
Reverse
Camera
Front
Camera
Reverse Light
Ground the wire through the exterior body of the vehicle and keep connection intact.
Ground the wire through the exterior body of the vehicle and keep connection intact.
Reverse Trigger
White
White
Blue
a) For RC 1.0 & RC 2.0
b) For RC 3.0
White
White
Blue
a) For RC 1.0 & RC 2.0
b) For RC 3.0
Front Camera
Reverse Camera
Display Monitor/ Car Radio
P
R
N
D
L
2
Red Wire
Black Wire (Ground)
ACC
INSTALLATION LOCATION
INSTALLATION LOCATION
Remarks :
1. Pictures are for illustration purpose only, see actual vehicle for accurate installation location.
2. Ensure diameter of hole size is correct before drilling.
3. Ensure drilling process does not harm the component of the vehicle.
4. Assign mounting location that will not obstruct camera view.
TY
PE 1
Tail
Light
1
2
Remove one side of
the reverse light
socket from its
housing then remove
the bulb from its
socket.
Connect the reverse
light power cable to
the camera, screwn
the housing & camera
back into position
with a screwdriver.
TY
PE 2
TY
PE 3
Hatch
Handle
Car
Plate
1
1
2
2
Use a screwdriver
to remove the original
hatch handle
Remove the rotating
mount before instal-
lation. Drill an access
hole for the
camera cables
Mount the camera
where the original
hatch handle used
to be
Mount the camera
onto the acces hole
& secure it in position
with 3M tape/ screws
A
ft
er
Installa
tion
Adjust
Viewing
Angle
