Blaupunkt PP14BT, Owner'S Manual

Page: 11 / 162

Battery charging: The unit will start charging after connection with DC power, and the power
LED on rear panel will turn to green color in case of be fully charged. You can understand the
battery power status by check the battery icon on the right top corner of display. The unit will
off automatically in case of exhausted battery power. Please kindly arrange re-charging for
playing.
Unit power on and standby: Press the power button in 2 seconds on the top panel of unit to
power on/off the unit. Short press the power button from top panel or remote control can
standby on/off the unit (clock time interface on display without sound output). The display will
light up after power on, and then you can start other operation.
Notes:
a. The supplied USB power cable includes universal USB connector and micro USB connector.
The universal USB connector is for DC adapter connection, and the micro USB connector is
for DC power USB jack connection.
b. Only the supplied power adapter or same rating spec adapter is allow to use for power
operation.
c. When you press off power by the power button on top panel, then the unit cannot power on
by remote control due to the power is cut off completely. Please press the power button on
top panel to power on the unit again.
d. The unit can play audio during charging, we suggest to power off(display off ) the unit for
charging in case of fully charge the battery in once.
Display back-light adjustment (dimmer)
Press the “ LIGHT” button on remote control or front panel can adjust the display back-light
brightness between high/middle and low level.
Time operation
Clock time:
Power on the unit, then short press the power button again enter to clock time
interface. Short press the mode button 3 times continuous to start the setting, and the hour's
digits will flare on display; turn volume knob to adjust the hour; press the next button skip to
minute's setting, or press the previous button return to hour's setting in case of need; turn the
volume knob to adjust the minute, and short press the power button to complete the clock
setting.
Alarm operation: Power on the unit, then short press the power button again enter to clock
time interface. Short press the mode button once to start the alarm1 setting, and alarm 1
icon(bell with digit 1) will light up; turn volume knob to adjust the hour; press the next button
skip to minute's setting, or press the previous button return to hour's setting in case of need;
turn the volume knob to adjust the minute; press the next button skip to alarm source
selection, turn the volume knob to switch the alarm source between
beep/USB/microSD/radio/play; short press the play/pause button and power button again to
confirm and complete the alarm setting. For alarm 2 setting, press the mode button twice to
start the setting program. The other is same operation as alarm 1.
PP14BT
E
N
G
L
IS
H
9