22
CONFIGURING THE SYSTEM
Press the arrow buttons (UP
or
DOWN ) to set the surround setting
to CHURCH / HALL / THEATER or OFF.
Press ENTER to confirm your selection.
3. Step: Configuring the
EQUALIZER
Press SETUP.
Press the arrow buttons (UP or
DOWN ) to set the equalizer setting
to POP / CLASSIC / ROCK or OFF.
Press ENTER to confirm your selection.
4. Step: Switching PRO LOGIC
on/off
Press SETUP.
Press the arrow buttons (UP
or
DOWN
) to switch Pro Logic ON or
OFF.
Press ENTER to confirm your selection.
If set to OFF, the ODA Surround ampli-
fier outputs the 5.1 or DTS signal as a
stereo signal.
5. Step: Configuring LISTEN
(dynamic range)
Press SETUP.
Press the arrow buttons (UP
or
DOWN ) to set the sound reproduc-
tion to
MAXIMUM (DAY) /
STAN-
DARD (EVENING) /
MINIMUM
(NIGHT).
Press ENTER to confirm your selection.
6. Step: Configuring BALANCE
Press SETUP.
Press ENTER repeatedly to select the
6 individual loudspeaker channels. Now
adjust the balance (0 to -20 dB) using
the arrow buttons (DOWN or UP ).
Press ENTER to confirm your settings.
7. Step: Configuring DELAY
Press SETUP.
Press ENTER repeatedly to select the
required loudspeakers.
Press the arrow buttons (UP
or
DOWN
) to set the delay for the
FRONT / CENTER / SURROUND
channels (0 to 1800 cm).
Press ENTER to confirm your selection.
Note:
The CENTER delay time is dependent
on the FRONT and SURROUND delay
time settings. Control range is 150 cm /
300 cm.
8. Step: Configuring SPK SET
(loudspeakers)
Press SETUP.
Press ENTER repeatedly to select the
required loudspeakers.
Every change you make to the set-
tings must be confirmed with
ENTER.
Set the front channel using the arrow
buttons (UP and DOWN ) to SMALL
or LARGE.
