Q: Cannot turn on the
when charging.
A: The
will shut down to protect itself from damage when charging is overloaded. To resume
operation, disconnect the USB connection and turn on the
again.
Electrical power
Information
AC/DC adaptor:
Input: 100-240 V AC 50/60 Hz, 0.6 A
Output: 12 V DC, 2 A
Specification
Bluetooth® wireless technology:
Bluetooth v2.1 + EDR, A2DP / AVRCP profile
Audio output power (10%THD) : 10W x 2
MILAN
MILAN
MILAN
Troubleshooting and Technical Specification
Q: No sound or sound is very low.
A: Make sure the Bluetooth wireless connection is correct and playback has been successfully started.
Check the volume level of your Bluetooth device.
Make sure you have disconnected the 3.5 mm audio in cable from the AUX input jack.
Q: Streaming stops and the Power LED turns off when plugging in device to the USB jack.
A: The
will shut down to protect itself from damage when charging is overloaded. To resume
operation, disconnect the USB connection and turn on the
again.
MILAN
MILAN
Q: My paired Bluetooth device can not reconnect to the
.
A: Press and hold PAIR to enter Pairing mode again. A reconnection may fail due to :
The pairing information has been deleted from your Bluetooth device.
You may have exceeded the allowable number of paired devices for the
. Only 8 Bluetooth devices
may have their pairing credentials stored at one time. Simply follow the above instructions for Pairing to
have a device paired again. However remember that the
can only store credentials for 8 devices.
Therefore the earliest paired device will be removed from that list of 8 to make room for the device you
wish to Pair.
MILAN
MILAN
MILAN
9
MILAN
