Blaupunkt LS200SUB, Owner'S Manual

Page: 8 / 137

1. Mount on the wall
a. Use the soundbar for location, and mark 2 holes by a pencil on the wall which has same distance as the wall bracket on the
soundbar. Then drill the mounting holes directly.
b. Put the plastic anchors onto the wall and secure the screws to the plastic clip, do not tighten the screws all the way make sure
leave some spaces.
c. Once the screws securely fastened, hang the soundbar over by inserting the screws onto the wall mount bracket.
Warning: If you are not confident to wall-mount the soundbar correctly and securely, please seek the assistance of an
experienced and skilled person of professional.
Install the speaker on a vertical, reinforced area of wall. For plastic walls, it is recommended to screw into wall studs for greater
security. For optimal performance, allow at least 25mm/1” distance between the soundbar and TV.
Audio wired connection and setting
Before power on the unit, please kindly connect the unit first. The soundbar has included digital (optical & HDMI(ARC)) and
analogue ( AUX IN) inputs for different source. You can reference below instruction for the connection depends on what device
you have.
1. Soundbar connect with output of your TV.
Remove the protective cap of the OPTICAL socket, and then using an OPTICAL cable (not included) to connect between the TV's
OPTICAL OUT jack and the OPTICAL input jack of soundbar, the HDMI(ARC)/AUX input connection is same.
6