14
Sound settings | Basic settings
Sound settings
Volume distribution (fader/balance)
You can adjust the volume distribution in the vehicle
for all sources.
쏅
In the current source, press the
[
]
button.
The equalizer menu is displayed.
Note:
The equalizer menu features a time-out function
(time window).
쏅
Press the
[
]
button.
The menu for fader and balance is displayed.
쏅
Adjust fader and balance with
[
]
/
[
]
or
[
]
/
[
]
.
쏅
Next press on
[
Equalizer
]
.
The setting is stored, the menu of the current source
is displayed again.
Equalizer
You can adjust the equalizer for all sources.
쏅
In the current source, press the
[
]
button.
The equalizer menu is displayed.
Note:
The equalizer menu features a time-out function
(time window).
쏅
Select a preset equalizer with
[
]
or
[
]
.
- Or -
쏅
Use
[
]
or
[
]
to adjust the level for
Bass
,
Mid
and
Treble
as well as the frequency of the
LPF
,
MPF
and
HPF
fi lters according to your needs.
쏅
Next press on
[
Equalizer
]
.
The setting is stored, the menu of the current source
is displayed again.
Note:
With the
[
]
button, you can restore the default val-
ues of the selected equalizer presettings.
Basic settings
In the settings menu of the device, you can adjust the ba-
sic settings for the diff erent functions of the Los Angeles
500 to your requirements.
쏅
In the main menu, press the
Settings
button.
The settings menu is displayed, the
General
sub-
menu is activated.
쏅
Call up the submenus with the buttons in the lower
area of the settings menu.
Video
The following settings are possible:
Camera input
– Adjust camera image (if a camera is con-
nected)
Video Input
– Adjust the colour system of the external
video input
DivX registration
– Display of the DivX® registration
code
General
The following settings are possible:
Tuner region
– Select the reception region for the radio
reception.
RDS
– Switch RDS on/off
TA VOL
– Set the minimum volume for traffi
c announce-
ments
Beep
– Switch confi rmation beep on/off
Calibration
– The touchscreen can be calibrated here.
SWC
– The buttons of a connected steering wheel con-
trol can be confi gured here.
Load factory
– Resets all personalised settings.
Time
The following settings are possible:
Clock mode
– Selection between 12 and 24-h mode
Clock
– Set the time
Sound
The following settings are possible:
Loudness
– Adjust the increase of bass at low volume.
Subwoofer
– Switch subwoofer on/off
Sub fi lter
– Make the setting according to the subwoofer
used (settings: 80/120/160 Hz).
Bass Q
– Adjust the quality factor for bass (settings:
1.0/1.25/1.5/2.0).
Mid Q
– Adjust the quality factor for middle (settings:
0.5/0.75/1.0/1.25).
