Blaupunkt Kingston MP47, Operating And Installation Instructions

Page: 10 / 216

10
Notes:
The device is switched off after a time
preset by you. For further details,
please read the section "Switch-off
time (OFF TIMER)" in this chapter.
The device remembers the audio
source played last for the next switch-
on.
Any CD already inserted in the device
remains there.
Attaching the control panel
1.
2.
Hold the control panel approximately
at a right angle to the device. (see fi g-
ure, 1.)
Push the control panel into the guides
at the bottom edge of the device.
Push the control panel carefully into the
bracket until it clicks into place.
Fold the control panel up into the slot
and press it gently into place until it
clicks. (see fi gure, 2.)
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting acti-
vated (radio, CD, CD changer, USB or AUX)
when the panel is replaced.
•
•
•
쏅
쏅
쏅
쏅
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 15 to 30 seconds.
Press the MENU/OK button
<
.
Press the or button
=
repeatedly
until the display shows "OFF TIMER".
Press the MENU/OK button
<
to open
the menu.
Set the time with the or button
=
.
When you have fi nished making your chang-
es,
press the ESC/DIS button
5
.
Timeout function
The device features a time-out function
(time window).
For example, if you press the
MENU/OK
button
;
and select a menu item, the de-
vice switches back after approx. 8 seconds
after the last button activation. The settings
performed are saved.
쏅
쏅
쏅
쏅
쏅
Detachable control panel
01_KingstonMP47_NRDS_eng.indd 10 01_KingstonMP47_NRDS_eng.indd 10 2/8/07 7:05:44 PM 2/8/07 7:05:44 PM