Blaupunkt HR5BR, Owner'S Manual

Page: 10 / 64

Remote control
01— Repeat button (Repeat all, random and repeat one).
02— Power ON/OFF button.
03— Light button for display backlight brightness adjustment.
04— EQ selection button(only for USB/microSD card playback mode)
05— Play/Pause button.
06— .
07— Volume -.
08— FM auto scan button.
09— Mode button for play source selection.
10— Previous button.
11— Next button.
12— Digits button (0~9).
Notes:
a. Before you use the remote control, please make sure the CR2025 battery has installed inside
properly according to the polarity indication.
b. Please remove the power insulation sheet before use the remote control.
c. Please disposal the exhaust battery in environmental method friendly. Please reference your
local government's requirement for the detail.
d. The best operation distance for remote control is within 5 meters without any block. Please aim
to the remote control sensor on unit front panel for operation.
Unit installment and power setting
Using the supplied USB power cable connect with DC adapter; and connect another terminal of USB cable to
the micro USB DC power jack on the back panel of the unit. Then plug on the DC adapter to your household
power source. The red LED power indication will light up after the power connection successful.
Press the power button in 2 seconds on the front panel of unit to power on/off the unit. Press the power
button from remote control can standby on/off the unit. The display will light up after power on, and then
you can start other operation.
HR5BR
8