12
If the USB data carrier is initially selected as
audio source, the data are read fi rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is briefl y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
쏅
Switch off the car sound system so that the
data carrier will be correctly unregistered.
쏅
Disconnect the USB data carrier.
쏅
After you pulled off the data carrier from the
USB port at the front of the device, close the
protective cap of the USB port
:
.
Inserting/removing the memory card
Inserting the memory card
쏅
Detach the control panel.
쏅
Insert the memory card with its labelled side
up and its contacts fi rst into the card slot
B
until it clicks into place.
쏅
Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
Notes:
• If the inserted memory card cannot be
played, "SD ERROR" is briefl y displayed.
• The time required for reading the card
depends on the design and size of the
memory card.
Removing the memory card
쏅
Detach the control panel.
쏅
Push on the memory card until it disengages.
쏅
Pull the memory card out of the card slot
B
.
쏅
Attach the control panel.
Selecting tracks
쏅
Turn rotary control
7
one notch counter-
clockwise or clockwise to change to the pre-
vious/next track.
Notes:
• If you turn rotary control
7
several
notches counter-clockwise or clockwise,
you jump forward or reverse by the corre-
sponding number of tracks.
• If the current track plays longer than 3
seconds and you turn rotary control
7
by
one notch counter-clockwise or clockwise,
the tracks starts playing again.
Fast searching
쏅
Press the rotary control
7
once.
The display briefl y shows "CUE/REVIEW".
쏅
Turn the rotary control
7
until the desired
position has been reached.
Note:
If you press the rotary control
7
twice, the
display briefl y shows "TRACK SELECT". By
turning the rotary control
7
, you select a
diff erent track.
Interrupting playback
쏅
Press the
3
button
>
to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
쏅
Press the rotary control
7
for approx. 2 sec-
onds to start the scan, or briefl y to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or fi le name.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA/iPod mode
