17
Essen CR 43
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
Now it is essential to enter the correct code
after the waiting period has elapsed (Cod in
the display).
If the radio is turned off before the waiting
period has elapsed, then the waiting period
restarts as soon as the radio is turned on
again.
Switching the code system off
•
Turn off the radio.
•
Simultaneously press preset buttons 1
and 4 and hold them down.
•
Turn the set on.
“Cod” will appear in the display.
•
Enter the code number given in the
Blaupunkt car radio passport and con-
firm: See example “Restart following
interruption …”.
The code system is now deactivated.
Optical indication of theft protec-
tion
As optical warning of the encoded car radio,
the LED
6
flashes when the ignition is
switched off, provided the car radio has been
connected correspondingly.
For this, please read through the installation
instructions.
If the power supply to the radio is interrupted
while the code system is switched on, you
need to know the right code number.
The radio will operate again as soon as you
have entered the right code number.
If you lose your radio passport and have
forgotten your code number, you will not be
able to restart the set after the power supply
has been interrupted. In this case, your radio
can only be reset in our central customer
service workshop or in one of our service
agencies abroad.
Switching the code system on
Precondition:
The radio must be connected to permanent
power.
In order to switch the code system on:
•
Turn the radio off.
•
Hold down the preset buttons 1 and 4
simultaneously.
•
Turn the radio on.
“Cod” briefly appears before the radio
begins to operate.
•
Release preset buttons 1 and 4.
The code system is on.
“Cod” will be briefly displayed each time the
radio is turned on.
Restart following interruption of
power supply
(Code system switched on)
•
Switch on the set.
“Cod” will appear in the display.
•
Briefly press preset button 1, “000” will
appear in the display.
•
Enter the code number given in the
Blaupunkt car radio passport:
Preset button 1 only allows to choose
“0” or “1”. The first “0” will not be dis-
played.
Example: the code number is 0521.
- Press preset button 1 until “000” ap-
pears in the display.
- Press preset button 2 five times,
“500” appears in the display.
- Press preset button 3 twice, “520”
appears in the display.
- Press preset button 4 once, “521”
appears in the display.
•
To confirm the code number:
Press the upper part of the rocker
switch .
Your car radio is now ready for operation.
If three dashes appear again in the display,
you have entered a wrong code number.
